- for standing seam and industrial metal roofs
- anchor point or component for Innotech lifeline systems
- preassembled elements allow fast assembly
- can also be installed on sliding clamps (SYST-01)
- installed without roof perforation (avoids thermal bridges)
- can by expanded / replaced at any time
- tested in accordance with EN 795

EAP SYST

Seam clamp as anchor point for standing seam, industrial metal, aluminium, titanium zinc and steel roofs (sheet thickness min. 0.5 mm).
Profile widths: 305 to 610 mm

Optimally adaptable to the profile width due to sliding screw placement. Base plate and clamps are made of corrosion proof aluminium.

- anchor point or component for Innotech lifeline systems
- low power inlet due to plastic deformability with high base stability
- optimal as an end or corner point for lifeline systems
- in combination with EAP SPAR-10-25 suitable fpr descending works
  (system for cable supported access)
- tested in accordance with EN 795

EAP STABIL-10 /-15

Standard post for concrete, wood, trapezoidal support sheet, steel construction, etc. Base plate size: 150 x 150 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 48 mm

- for concrete, hollow concrete slab, wood and wood sandwich structured
  composite, trapezoidal supporting sheet and steel construction
- low load transmission due to plastic deformability
- additional safety bush avoids the max. power inlet to the welding seam
- tested in accordance with EN 795

EAP QUAD-10

Stainless steel post for concrete, wood, trapezoidal supporting sheet, steel construction.
Base plate size: 150 x 150 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mm

Stainless steel post for hollow concrete slab and wood sandwich structured composite.
Base plate size: 235 x 235 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mm

- for trapezoidal supporting sheet over 100 mm corrugation height
- low power inlet due to plastic deformability
- high stability due to special construction
- drill fasteners allow quick installation
- tested in accordance with EN 795

EAP QUAD-12

Stainless steel post for trapezoidal supporting sheet with corrugation height over 100 mm.
Base plat size: 390 x 400 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mm

- for concrete and trapezoidal supporting sheet
- low power inlet due to plastic deformability
- additional safety bush avoids the max. power inlet to the welding seam
- drill fasteners allows quick installation
- tested in accordance with EN 795

EAP QUAD-13

Stainless steel post for concrete and trapezoidal supporting sheet. Base plate size: 212 x 212 mm
Post height: 300 / 400 / 500 / 600 mm, Ø 16 mm

- for wood and concrete
- can be checked at any time with torque (EAP POINT-12)
- low power inlet due to plastic deformability
- quick and easy installation
- tested in accordance with EN 795

EAP POINT-11

Stainless steel post for wood - screw-in installation with
integrated breaking load safety (stainless steel cable)
Post heights: 300 / 400 / 500 / 600 mm, Ø 18 mm

Stainless steel post for concrete - ideal for repeated inspection. After installation, the torque can be checked at any time.
Post heights: 300 / 400 / 500 / 600 mm, Ø 18 mm

Stainless steel post for concrete - adhesive installation.
Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mm

- for copper standing seam roofs
- anchor point or components for Innotech lifeline systems
- without roof perforation (avoids thermal bridges)
- tension-free installation due to variable adjustable range
- can be expanded / replaced at any time
- tested in accordance with EN 795

EAP FALZ-15

Seam clamp as anchor point for standing seam roofs.
(Sheet thickness min. 0.6 mm) Profile widths: 360 - 790 mm

- for steel and aluminium trapezoidal cover sheets
- anchor point or component for Innotech lifeline systems
- drill fasteners allow fast installation
- multifarious installation options due to multiple drilling rows
- can be expanded / replaced at any time
- tested in accordance with EN 795

EAP SAND-10

Trapezoidal cover sheet fastening for steel.
(Sheet thickness: min. 0.6 mm)
Base plate size: 360 x 415 mm

Trapezoidal cover sheet fastening for steel.
(Sheet thickness: min. 0.6 mm)
Base plate size: 430 x 389 mm

Trapezoidal cover sheet fastening for aluminium.
(Sheet thickness: min. 0.6 mm)
Base plate size: 360 x 415 mm

- for flat roofs with parapet
- anchor point or component for Innotech lifeline systems
- dead weight, can be filled with concrete or concrete slabs
- installation without roof perforation (avoids thermal bridges)
- can be expanded / replaced at any time
- tested in accordance with EN 795

EAP VARIO-10

Dead weight anchor for flat roofs with parapet and up to 3° incline.
(Concrete or concrete slabs not included in shipment)
Dimensions: 1675 x 1675 mm, final weight approx. 350 kg
(Concrete or concrete slabs not included in shipment)

- mobile skylight protection and temporary anchor point
- optimal for short term work
- fastened to the skylight with ratchet system
- fast and easy installation due to handles
- tested based on EN 1263-1 and EN 795

EAP MOBI

The safety net is pulled over the skylight with the help of 4
positioning handles and secured with a lashing strap. Ideal
for short term work on roofs and for temporary safety along
footpaths. Net size: 2 x 2 m and 3 x 3 m