- preassembled horizontal lifeline system
- integrated shock absorber as well as constant spring pre-load
- compatible with all AIO components
- easy to inspect
- tested in accordance with EN 795

LIFELINE KIT

For almost all applications, for example: suitable for industry, roof
and facade, and compatible with all Innotech components. When
assembled correctly, the combination of spring pre-load and shock
absorbers reduces the force of a fall on the end and corner units
to a maximum of 10 kN. Available in various lengths.

- for standing seam and industrial metal roofs
- anchor point or component for Innotech lifeline systems
- preassembled elements allow fast assembly
- can also be installed on sliding clamps (SYST-01)
- installed without roof perforation (avoids thermal bridges)
- can by expanded / replaced at any time
- tested in accordance with EN 795

AIO SYST

Seam clamp as anchor point for standing seam, industrial metal, aluminium, titanium zinc and steel roofs (sheet thickness min. 0.5 mm)
Profile widths: 305 to 610 mm

Optimally adaptable to the profile width due to sliding screw placement. Base plate and clamps are made of corrosion proof aluminium.

- for copper standing seam roofs
- anchor point or components for Innotech lifeline systems
- without roof perforation (avoids thermal bridges)
- tension-free installation due to variable adjustable range
- can be expanded / replaced at any time
- tested in accordance with EN 795

AIO FALZ-25 /-45

Seam clamp as lifeline system component for standing seam roofs.
(Sheet thickness min. 0.6 mm)
Profile width: 360 - 790 mm
AIO FALZ-25: Intermediate bracket for
Innotech lifelinesystems
AIO FALZ-45: Corner or end point for
Innotech lifeline systems

- anchor point or component for Innotech lifeline systems
- low power inlet due to plastic deformability with high base stability
- optimal as an end or corner point for lifeline systems
- in combination with EAP SPAR-10-25 suitable fpr descending works
  (system for cable supported access)
- tested in accordance with EN 795

AIO STA 10

Standard post for concrete, wood, trapezoidal support sheet,
steel construction, etc.
Base plate size: 150 x 150 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 48 mm

Post for steep roof as component for Innotech lifeline systems or anchor point.
Base plate size: 150 x 150 mm
Post heights: 340 / 470 mm, Ø 48 mm

Standard post for concrete, hollow concrete slab, steel construction. Base plate size: 300 x 300 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 48 mm

Side mounted post with breaking load safety for concrete
(facade), steel construction. Base plate size: 150 x 150 mm
Post heights: 200 / 500 mm, Ø 48 mm

- for steel and aluminium trapezoidal cover sheets
- anchor point or component for Innotech lifeline systems
- drill fasteners allow fast installation
- multifarious installation options due to multiple drilling rows
- can be expanded / replaced at any time
- tested in accordance with EN 795

AIO SAND-10

Trapezoidal cover sheet fastening for steel.
(Sheet thickness: min. 0.6 mm)
Base plate size: 360 x 415 mm

Trapezoidal cover sheet fastening for steel.
(Sheet thickness: min. 0.6 mm)
Base plate size: 430 x 389 mm

Trapezoidal cover sheet fastening for aluminium.
(Sheet thickness: min. 0.6 mm)
Base plate size: 360 x 415 mm

- for flat roofs with parapet
- anchor point or component for Innotech lifeline systems
- dead weight, can be filled with concrete or concrete slabs
- installation without roof perforation (avoids thermal bridges)
- can be expanded / replaced at any time
- tested in accordance with EN 795

AIO VARIO-20 /-40

Dead weight Innotech lifeline system components for flat
roofs with parapet and up to 3° incline (Concrete or concrete
slabs not included in shipment)
VARIO-20: Intermediate bracket for Innotech lifeline systems
Dimensions: 586 x 1630 mm, final weight approx. 180 kg
VARIO-40: End and corner point for the AIO horizontal lifeline system.
Dimensions: 1675 x 1675 mm, final weight approx. 350 kg